- ページ 8

電話 ALcom AT-5928のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ALcom AT-5928 12 ページ。 Caller id phone

ANTI- DIALING FROM PARALLEL PHONE
In on-hook state, press and hold #/= key for 3 seconds, LCD displays SPI ON
1.
Press H.F key twice and then
2.
Press and hold #/= key for 3 seconds again, LCD displays SPI OFF,
3.
When the anti-dial is set to ON, users who want to dial using an extension to dial via the same
line will hear a "DI-DI, DI-DI" beep continuously and will not be allowed to make a call.
Note:If page number is set this function will not work.
SETTING RINGING TONE AND ADJUST RINGING VOLUME
There are 16 kinds of ringing tones and ringing OFF for selection:
In on-hook state, press RING key, LCD displays ring 02 db8
1.
Press RING to select the desired ringing or set ring OFF.
2.
Press UP/+ or DOWN/- key to set ringing volume
3.
Press SET to confirm and exit.
4.
NOTE: The volume ranges from 1db-8db, with 8db being the loudest. Use UP/+ or DOWN/- key
to adjust the ring volume. Ring OFF is "Do Not Disturb" mode. If the phone is set to this mode,
the telephone will not ring when there is an incoming call.

ADJUST HANDSFREE VOLUME

In hands free mode, press UP/+ or DOWN/- to adjust the handsfree volume, LCD displays the
volume level and there are a total of 3 levels.

SELECTING PULSE OR TONE DIALING MODE

In on-hook state, press and hold */. key for 3 seconds, LCD displays P, then dialing mode is
1.
set as Pulse.
Press H.F key twice and hold */. key for 3 seconds again, LCD displays T then dialing mode
2.
is set as Tone.

SETTING PABX CODE

In on-hook state, press and hold DEL key 3 seconds to set PABX code, LCD displays
1.
SET PCODE- and the" -" flashes.
Press UP/+ or DOWN/- key to set PABX code from 0 to 9.
2.
If choose " -", it means no PABX code has been set.
3.
4. Press SET key to confirm and quit.
HOLD ON MUSIC
When talking over handset, press HOLD key to enter the hold mode and the hold
music is sent out. In hold mode
Press HOLD key to release hold mode and continue to talk over handset, or
1.
2. Hang up handset, it enters hands-free hold mode.
When talking at hands-free mode, press HOLD key to enter the hold mode and the
hold music is sent out. In hold mode
1. Pick up handset to talk over handset, or
2. Press H.F key to quit hold mode and talk at hands-free mode.
8