ページを印刷する
"13").
NEW INCOMING CALL LED AND RINGING LED
New and ring indicator is the same LED, when a new call comes in, the LED is blinking, when a
new number has not been reviewed, the LED is blinking in 4s interval.
PREVENTING FSK MESSAGE TO AUTO-ADJUST REAL TIME
When a FSK message comes, the unit adjusts real time automatically, you can prevent real time
auto adjustment as follows:
1. In on-hook state, press and hold ALARM key for 3 seconds, LCD displays DATE OFF,
2. Press ALARM key again, LCD displays DATE ON,
3. Press SET key to quit.
NOTE: DATE OFF: Does not allow real time auto adjustment
REVIEWING, CALLING BACK AND DELETING OUTGOING NUMBERS
Reviewing
In on-hook state, press OUT/X key, then repeat OUT/X to review
Calling back
1. In on-hook state, press OUT/X key to review the desired number, then press H.F. key or pick
up the handset, and the number is dialed out, or
2. Press REDIAL key, LCD displays PICK UP, press H.F. key or pick up the handset, the number
is dialed out.
Deleting
1. In on-hook state, press OUT/X key to scroll to the desired number.
2. Press DEL key and the number is deleted, or
3. Press and hold DEL key for 3 seconds. All numbers will be deleted.
SETTING MENU
Setting date & time
1. In on-hook state, press SET key, the value for the year flashes.
2. Press UP/+ or DOWN/- key to edit the year.
3. Press SET key to confirm and enter the next value month setting.
4. Repeat the year setting step to set the month.
5. Repeat the above steps for date and time setting.
Setting Local Area Code and Long Distance Code
1. After setting up the date and time, press SET key. LCD displays CODE 0 ----and the long
distance code" 0" flashes,
2. Press UP/+ or DOWN/- key to edit the flashing code from 0 to 9.
3. Press SET key to confirm and enter the next flashing code setting.
out
5
going numbers one by one.