- ページ 16

電話 Alcom Premium ADT1308のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alcom Premium ADT1308 18 ページ。 Telephone

Trouble shooting

Problems

No Dial Tone

Not able to get through automated

phone services. Eg. Phone banking

Only can receive calls. Cannot make

outgoing calls.

The

phone

rings

interrupted, but dialing function works

well.

Noise during conversation

Phone does not ring for incoming calls

Handset has no display

"Base 1" blinks in handset

Caller ID does not appear

once

then

Check if the base unit is connected to the

Telephone line and ensure the line is functional.

Please check if your phone is set to TONE dialing

Set PULSE mode only for older type of phone

lines. Please check with your operator for

required setting

Check if call barring is activated

Check if the connector of telephone line is moist.

Check if too many paralleled phones are used

together. Remove or replace some of them.

Check if the wall socket of telephone line is moist

or rusty. Replace accordingly.

Check if the wall socket of telephone line is moist

or rusty. Replace accordingly

Check if RINGER is OFF

Check if the rechargeable batteries are properly

charged

Check if the charging contacts are clean in both

the handset and base.

Check and make sure the AC adaptor for the

base unit is ON and working

Check if the registration with base is lost. If so

Check if you are out of range from the base unit.

Move closer to the base unit.

Check if you have subscribed for Caller ID service

and is active

Actions