- ページ 2

タイマー Ergo Systems 2000U8のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Ergo Systems 2000U8 14 ページ。 U8 timer

This is the digital timer unit for the Autopetfeeder. The timer plugs in to the wall socket and has two outlets, one

outlet is labeled as "Power" which is on the left hand side of the timer, directly connects to the power supply, and

the second outlet is labeled as "Timer" which is on the right hand side of the timer switches the Autopetfeeder

ON and OFF based on the timer settings. The indicator will glow when ever the feeder is ON.

First time use :

Connect your digital timer unit into the wall socket. This will charge the internal battery if

you are using the timer for the first time. Reset it by pressing the Master Reset button using a small pin such

as a paperclip. This will reset the timer. All other programming functions can perform without plugging the

timer in to the wall socket.

NOTE:

The timer may have to be charged for 10 minutes prior to use if the timer display is blank. Press the Master Reset

button after 5 minutes while the timer is charging.

TIMER PROGRAMMING