- ページ 11

カー・ステレオ・システム Clarion DB258RのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Clarion DB258R 17 ページ。 Clarion cd receiver owner's manual
Clarion DB258R にも：オーナーズマニュアル (2 ページ), (フランス語）雇用形態 (18 ページ)

ページを印刷する

RDS Operations

REG (Regional Programme) function

When the REG function is ON, the optimum re-

gional station can be received. When this func-

tion is OFF, if the regional station area switches

as you drive, a regional station for that region is

received.

∗ The factory default setting is "OFF".

Notes:

• This function is disabled when a national station

such as BBC R2 is being received.

• The REG function ON/OFF setting is valid when

the AF function is ON.

• • • • •

Switching the REG function ON

Press and hold the [ AF ] button for 1 second or

longer.

"REG" in the display lights and the REG function

turns on.

• • • • •

Switching the REG function OFF

Press and hold the [ AF ] button for 1 second or

longer.

"REG" in the display goes off and the REG func-

tion turns off.

Manually tuning a regional station in

the same network

1. This function is valid when the AF function is

ON and the REG function is OFF.

Note:

• This function can be used when a regional broad-

cast of the same network is received.

2. Press any one of the [ DIRECT ] buttons to call

out the regional station.

3. If the reception condition of the called out sta-

tion is bad, press the [ DIRECT ] button of the

same number. The unit receives a local sta-

tion on the same network.

TA ( Traffic Announcement )

In the TA standby mode, when a traffic announce-

ment broadcast starts, the traffic announcement

broadcast is received as top priority regardless of

the function mode so you can listen to it. Traffic

programme ( TP ) automatic tuning is also possible.

∗ This function can only be used when "TP" is lit in

the display. When "TP" is lit, this means that the

RDS broadcast station being received has traffic

announcement programmes.

• • • • •

Setting the TA standby mode

If you press the [ TA ] button when only "TP" is lit

in the display, "TP" and "TA" light in the display

and the unit is set into the TA standby mode until

a traffic announcement is broadcast. When a traffic

announcement broadcast starts, "TRA INFO" ap-

pears in the display. If you press the [ TA ] button

while a traffic announcement broadcast is being

received, the traffic announcement broadcast re-

ception is cancelled and the unit goes into the TA

standby mode.

• • • • •

Cancelling the TA standby mode

With "TP" and "TA" lit in the display, press the

[ TA ] button. The "TA" in the display goes off and

the TA standby mode is cancelled.

∗ If "TP" is not lit, pressing the [ TA ] button searches

for a TP station.

• • • • •

Searching for a TP station

When "TP" is not lit, if you press the [ TA ] button,

"TA" in the display lights and the unit automati-

cally receives a TP station.

Note:

• If a TP station is not received, the unit continues the

search operation. Pressing [ TA ] button again goes

off "TA" in the display and stops TP station search-

ing.

Auto store function for TP stations

You can automatically store up to 6 TP stations

into preset memory. If the number of TP that can

be received is less than 6, broadcast stations al-

ready stored in memory are left without being

overwritten.

With "TA" lit in the display, press and hold the

[ P/A ] button for 2 seconds or longer. The TP sta-

tions with the good reception sensitivity are stored

into present memory.

∗ Even if you select FM1 or FM2, a TP station is stored

into memory for FM3.

PTY

This function enables you to listen to a broadcast

of the selected programme type when it starts

even if the unit is on a function mode other than

radio.

∗ Some countries do not yet have PTY broadcast.

∗ In the TA standby mode, a TP station has priority

over a PTY broadcast station.

DB258R