- ページ 3

計測機器 Alcovisor AlcoTorch V9のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alcovisor AlcoTorch V9 4 ページ。

Alcovisor AlcoTorch V9 ユーザーマニュアル
6
When displays "Ready", press and hold the "On/Off Button" for 3 seconds
to turn off the device. The device will be automatically turned off after 5
minutes.
Body Temperature Measurement
1
When displays "Ready", press and hold the "Torch Button" for 3 seconds to
enter
body
Temperature Measurement Ready".
2
Place the device in front of the forehead within 2-5 cm, the body
temperature will be displayed automatically.
3
Temperature below 34.1℃ displays "LO", above 42.9℃ displays "HI"
4
Temperature Setting:
4.1 Press and hold the "Flashlight Button" for 3 seconds to enter
Temperature Setting.
4.2 Unit: Select Celsius or Fahrenheit
4.3 Compensation: Temperature measurement reading can be offset if it
has error by increasing or decreasing the value.
4.4 Reading: Select whether to display the exact reading or display only
"Pass" or "Fail".
4.5 Alert: Set the alert value, default setting is 37.3℃
Flashlight & Torch
1
Press " Flashlight Button" to switch the flash frequencies between steady,
flashing and off.
2
Press "Torch Button" to switch the Torch lights at the bottom of the handle.
temperature
measurement.
Display
3
shows
"Body