- ページ 8
扇風機 AerAtron FR3-50のPDF ユーザーマニュアル&インストールマニュアルをオンラインで閲覧またはダウンロードできます。AerAtron FR3-50 18 ページ。
AerAtron FR3-50 にも: ユーザーマニュアル&インストールマニュアル (18 ページ)
Pairing the Remote Control
STEP 6
Pairing a Single Fan per remote control: LEARN MODE
1. On Receiver: Verify that the "Learn" switch is in the "O" position
2. Slide battery cover to unlock - Locate the LEARN BUTTON &
insert batteries.
3. Switch on the main power to activate the receiver, indicated
by one beep. (Energise one fan reciever at a atime).
4. Within 60 seconds after the power is turned on (one beep),
press and hold the LEARN button on the Remote Control
(min. 3 secs.) until Fan Receiver issues three 'beeps' which
indicates successful pairing.
5. On Receiver: switch the "Learn" switch to "X" (this will
lock the pairing code with the remote)
6. Finish STEP 7, 8 & 9 and press ON/SPEED button to test
fan functions.
7. To re-pair, repeat steps 3 to 5
NOTE: Power must be off for 10 seconds min. before repairing.
The Remote Control and Fan Receiver will memorise the pairing
code for future use even if mains power is switched off.
LIGHT SWITCH: Select ON/OFF or DIMMING for the light function.
(Light will maintain last setting if turned off)
Pairing
One remote control can control up to 8 fans (within a 7m (23") radius).On ALL receivers verify that the
"Learn" switch is in the "O" position. Switch on the mains power to activate ALL receivers at the same time,
indicated by one 'beep'. Within 60 seconds, press and hold the LEARN button on the remote control (min. 3
seconds) until fan receiver issues three 'beeps'.
2
3
Pairing is always required during setup.
!
Note: "Learn" switch on receiver (STEP 4)
per Remote Control.
Controlling the Fan
2.
1
Use forward mode (clockwise) for cooling.
4
warm air.
5
LIGHT SWITCH
'LEARN' BUTTON
O LIGHT DIMMING
| LIGHT ON/OFF
Speed Up/Down - 1-6 Speed
. (LIGHT SWITCH
7