- ページ 10

カーアラーム Clarion G1100のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Clarion G1100 15 ページ。 Vehicle security system

• The status LED will turn on red.

• The siren will chirp 5 times.

3. Within 5 seconds follow the steps below for each transmitter:

Continue holding the Override switch and Press Transmitter Button 1 for remote arming with chirp confirmation.

--- or ---

Release the Override switch and Press Transmitter Button 1 for remote arming without chirp confirmation.

• The status LED will flash once quickly to confirm that the new Remote Transmitter has been added.

4. Turn off the ignition.

• The siren will chirp 3 times to confirm that the new Remote Transmitters have been added.

Deleting Transmitters (Adding a Remote Transmitter and Erasing All Other Transmitters From the System)

Code all memory locations to delete any lost transmitters. Example: if two transmitters are used, after coding the first

transmitter, code the second transmitter three times to fill up the remaining memory locations.

Page 9 - G1100 Installation Manual