- ページ 36

ゲーム機 XBOX ClubSport FanatecのPDF マニュアルをオンラインで閲覧またはダウンロードできます。XBOX ClubSport Fanatec 41 ページ。

Clean only with a dry or slightly damp cloth. Using cleaning solutions may dam-

age your Universal Hub for Xbox One.

The Universal Hub must not be modified differently than described in this man-

ual. Endor

hardware, software and firmware contained in the controller. In case difficulties

occur in connection with utilization of the Universal Hub, please use the follow-

ing guide for elimination of errors. On the website www.fanatec.com/support

you will find further details and contact data.

If the Universal Hub is not working properly:

Problem description

After switching on the wheel base with attached

Universal Hub for Xbox One the auto calibration

is not working properly.

The driver window does not show the attached

steering wheel.

In driver window the button mapping seems to be

wrong as button boxes are not shown.

AG expressly prohibits analysis and utilization of the electronics,

CLEANING

Solution

Make sure that you have updated your wheel

base to the latest firmware version which can be

downloaded from www.fanatec.com/support.

Try to use another steering wheel like the

RFormula or RBMW. If the auto calibration is not

working properly with this rims the wheel base

might be damaged.

Make sure that you have updated your wheel

base to the latest firmware version which can be

downloaded from www.fanatec.com/ support.

Check the pins inside the Quick Release of the

Universal Hub for Xbox One, these must not be

bent or damaged.

Try to use another steering wheel like the RFor-

mula or RBMW. If this is also not detected the

wheel base might be damaged.

The buttons of the button boxes are mirrored

from the buttons on the top side of the Universal

Hub for Xbox One. For more detailled description

please see chapter 7 (Electronic connectors) of

this user manual.