- ページ 2

ゲーム機 XBOX TP5-05111のPDF マニュアルをオンラインで閲覧またはダウンロードできます。XBOX TP5-05111 3 ページ。 Ps5 multi-function cooling base

2.1. Place the base on a well-ventilated platform. The base is compatible with the CFI-1000A and the CFI-1000B PS5 hosts,

install the host vertically to the slot on the embedded base, insert the associated screw into the bottom fixing hole and lock it

with the host for reinforcement.

2.2. Plug the USB charging cable that is matched with the product into the TYPE-C input port to connect the PS5 host for

power supply.

3.3. The controller can be charged after the installation is completed: with the PS5 controller facing forward, it can be charged

through inserting in the left or right charging dock in an inverted way.

III. Function description

1. TYPE-C input port:

2. Fan and ambient light switches: when the base is powered on, press the switches to turn on and off the fan and ambient

light.

3. Cooling fan: there is a high-speed fan in the back of the base, which can speed up the air circulation inside the host to

achieve the purpose of heat dissipation.

4. Ambient light: there are ambient lights around the base, which work synchronously with the fan, when the fan is started,

the ambient lights are turned on; when the fan is stopped, the ambient lights are turned off.

5. Charging dock: it can be used to charge two PS5 original PS5 controllers at the same time; charging can be realized by

inserting the PS5 controller to the left (right) charging dock according to the drawing.

6. Charging display window: the controller charging display window can display the charging status of the controller:

6.1. After the base is powered on, the controller icons on the display screen are in blue. Place the controller on the left (right)

charging dock for charging, the corresponding left (right) controller display screen turns to red immediately; when the

charging is completed, the display will turn to blue again.

6.2. PS5 controller is not connected to the host for charging: the charging indicator on the controller is in orange breathing

display; when the charging is completed, the charging indicator on the controller is turned off.

6.3. PS5 controller is successfully connected to the host for charging: the charging indicator on the controller is in white and

always-on display; if you charge the controller in the game, on the controller there will be blue light and white light always

on.

6.4. When the charging power to the PS5 controller reaches about 80% or more, if you unplug the controller and plug it again

to charge, the controller may not be charged due to the battery protection function of the controller; the charging will not be

enabled until the battery power to the controller is below 80%.

IV. Technical parameters

1. Input voltage: DC 5V

2. Input current: 3A (using dedicated charging cable for the product)

3. Controller charging voltage: DC 5.1V

600 mA*2;

4. Controller charging current: 600 mA*2;

5. Fan speed: 5500± 1100r/min;