- ページ 31
プリンター Xerox 1235/DX - Phaser Color Laser PrinterのPDF ネットワーク・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox 1235/DX - Phaser Color Laser Printer 34 ページ。 Network guide
Xerox 1235/DX - Phaser Color Laser Printer にも： パンフレット＆スペック (4 ページ)
ページを印刷する
Dynamic addressing (RARP/BOOTP
The TCP/IP address is assigned automatically by the Server. Follow
the steps below:
1.
Press Menu Up or Menu Down until you see:
Menus
Ethernet Menu
2.
Press Item Up or Item Down until you see:
Ethernet Menu
IP Address Resolution
Press Value Up or Value Down until you see:
3.
IP Address Resolution
BOOTP/RARP
4.
Press Enter.
5.
Update the RARP/BOOTP
and the /etc/hosts files with a host name, TCP/IP and Network
addresses. Consult your UNIX documentation for more
RARP/BOOTP
6.
Power off the Printer.
7.
Power the printer on and allow time for an IP address to be
assigned by the RARP/BOOTP
depending on network traffic).
8.
Perform the steps contained in the section of this document
entitled Appendix A: Print the Configuration Sheet.
9.
Obtain the TCP/IP address from the Configuration Sheet.
1
RARP is not functional even when selected. Only BOOTP is
functional.
1
1
server's /etc/ethers or /etc/bootptab
1
server configuration details.
1
)
1
server (this time may vary