- ページ 17

プリンター Xerox 6180DN - Phaser Color Laser PrinterのPDF セキュリティ・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox 6180DN - Phaser Color Laser Printer 38 ページ。 26-ppm monochrome/ 20-ppm color
Xerox 6180DN - Phaser Color Laser Printer にも： インストレーション・マニュアル (34 ページ), 仕様書 (2 ページ), ユーザーマニュアル (32 ページ), ユーザーマニュアル (28 ページ), インストールマニュアル (2 ページ), リリースノート (2 ページ), インストールマニュアル (2 ページ), スタートマニュアル (37 ページ), マニュアル (34 ページ), マニュアル (34 ページ), スタートマニュアル (34 ページ), ユーザーマニュアル (32 ページ), 設置および操作マニュアル (8 ページ), 仕様 (4 ページ), マニュアル (28 ページ)

ページを印刷する
Xerox 6180DN - Phaser Color Laser Printer セキュリティ・マニュアル

Security warning banners

Disabling LP anonymous printing

Remote shell internet service

enable-ftp and disable-ftp

Security Guide
Security warning banners are displayed when a user logs in or
telnets into the Xerox FreeFlow Print Server. This message
explains that only authorized users should be using the system
and that any others face the possibility of being monitored by law
enforcement officials.
NOTE: DRW (Xerox FreeFlow Print Server Remote Workflow) is
not impacted by security settings.
You can choose to disable anonymous printing on all existing LP
printer queues that are associated with the Xerox FreeFlow Print
Server virtual printers. When anonymous LP is disabled, only
systems that have their IP address in the Xerox FreeFlow Print
Server controller /etc/hosts table are authorized to submit LP
requests. Answer "y" for yes to disable this printing option.
If you are using the legacy Xerox print command line client (the
software is not distributed with this release), you will need to use
the remote shell internet service to transfer files to the Xerox
FreeFlow Print Server controller. However, if you are not using the
Xerox print command line client, it is strongly recommended that
the remote shell internet service is disabled. When these three
questions are answered, all remaining aspects of the "High"
security setting are implemented.
These options allow for temporary enabling and disabling FTP
alone. Will not persist through reboots. You must have FTP
enabled when using a Continuous Feed system, or FreeFlow®
Production Print and NetAgent.
FTP is also required for the Call for Assistance (CFA) feature. This
uses FTP to push IOT logs and a Xerox FreeFlow Print Server
outload back to the Print Server controller.
NOTE: Temporarily enable FTP through the Xerox FreeFlow Print
Server Setup > FTP/Remote Diagnostics menu option.
13