Preventing jams
I
To reduce the frequency of paper and transparency jams, use only Xerox Phaser branded paper
and media designed for the Phaser® 6200 printer. See the Supplies section in the Support Guide
on the Interactive Documentation CD-ROM or go to the Xerox web site at:
http://www.xerox.com/officeprinting/6200supplies
I
Fan paper prior to loading in the trays or the Multi-Purpose Tray.
I
For supported paper sizes, see the Supported Papers section in the Trays and Paper Guide on the
Interactive Documentation CD-ROM.
I
For proper paper-loading instructions, see the Loading Trays section in the Trays and Paper Guide
on the Interactive Documentation CD-ROM.
I
Use clean, undamaged paper. Do not use paper that is curled.
I
Load paper from a newly opened package.
I
Do not add paper above the tray's fill line.
I
Make sure that the tray guides are properly set for the paper size.
What causes a paper jam?
Paper jams occur most often under these conditions:
I
An incorrect paper type was selected in the printer driver.
I
The paper does not meet specifications.
The loaded paper size or weight is not supported by the paper tray.
I
I
The paper is damaged, moist, curled, creased, or folded.
The paper is not loaded properly.
I
The tray's side and rear guides are not adjusted properly for the paper.
I
I
The tray is overfilled; paper is loaded above the tray's fill line.
Jam at the fuser
Follow these steps to clear the jam. Refer to the labels inside the printer for jam-clearing instructions.
1.
Use the latch on the right side of the printer to open Front Door B.
Phaser® 6200 Color Laser Printer
to order supplies.
6200-65
Paper Jams
5