- ページ 5

プリンター Xerox 82 SeriesのPDF ヒント・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox 82 Series 8 ページ。 Wide format printer
Xerox 82 Series にも：ユーザーマニュアル (44 ページ)

Troubleshooting

• The ink level percentages are only estimates. One of the things to check if you are

having image defects such as banding or voids is that there is ink in each of the cartridges.

• To check Ink status use the up "menu" button > select "ink Status", this menu will show

percentages and can also be used to check presence of ink cartridges.

• If the printer GFI power cord "trips" (turns off the power going to the printer), turn off

the power switch on the printer (button must be in up position). Press the reset button on

the GFI (it may require several resets) and then turn the printer power switch back on.

• When printing large solid area coverage prints if vertical patterning is seen try reducing

the A,B,C heater temperatures by 5 C.

Error code listing – Call for Service

Control board errors

E001, E002, E007, E016 – Power machine off & on several times if error will not clear –

Call Service

Mechanical errors

E065 - E082 – If caused by media jam, clear media and power off and on printer. If error

will not clear – Call Service

Power and heater errors

E100 – E129 – Call Service