- ページ 25

プリンター Xerox 82xxのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Xerox 82xx 44 ページ。 Wide format printer
Xerox 82xx にも： ヒント・マニュアル (8 ページ)

ページを印刷する
Xerox 82xx ユーザーマニュアル
Check if the edges of the loop are aligned on each other.
Step 4 :
Raise the pressure rollers. Slide the end of the strip (1) under the pressure rollers (4) and move
Step 5 :
it to position 1 as shown on the picture below. Lower the pressure rollers.
Go to the FRONT SIDE of the printer.
Step 6 :
Carefully pull the strip to create some tension.
Step 7 :
Caution
•
Don't pull too hard on the strip. This will loosen the tape, resulting in the fact that the loop
becomes longer, leading to a bad calibration check.
•
Make sure that you have an equal tension on the left and right of the strip.
No
Description
1
Synthetic paper strip
2
Paper loop
3
Tensioning bars
4
Pressure rollers
3-11