- ページ 41
プリンター Xerox 83 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Xerox 83 Series 44 ページ。 Wide format printer
Xerox 83 Series にも： ヒント・マニュアル (8 ページ)
ページを印刷する
Be sure that the media is loaded centrally. This to be sure that the media is wound up straight.
Step 9 :
This can be easily checked by the yellow labels on the winding rails. Be sure to mount the left
and right roll unit on the same distance from the 0I0 label.
Step 10 : Install an empty core between the front roll units.
a. Make sure the core is longer than the media width.
b. Load it centrally as described in previous step
Step 11 : Use the foot-switch to release some media at the rear.
Step 12 : Load media through the rear tensioning bar, over the print platform, under the pressure rollers as
pictured below.
Outside printable
1
2
3
4
Inside Printable
Roll unit
Media roll
Rear tensioning bar
Print platform and
pressure rollers
4-3