ページを印刷する
2. Remove the imaging unit.
Warning:
Do not expose the imaging unit to direct light for
more than 10 minutes. Extended exposure to light may
cause print quality problems.
Warning:
Do not touch the photoconductor drum. Doing so
may affect the quality of future print jobs.
3. Open the rear door.
CAUTION—HOT SURFACE:
The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
10
4. Remove the jammed paper.
Note:
Make sure that all paper fragments are removed.
5. Close the rear door.
6. Insert the imaging unit.
7. Close the front door.