- ページ 19

プリンター Xerox Color C70 SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox Color C70 Series 34 ページ。 Quick network scanning guide
Xerox Color C70 Series にも：インストレーション・マニュアル (35 ページ), クイック・ユース・マニュアル (3 ページ), クイックマニュアル (1 ページ), クイックマニュアル (1 ページ)

Detailed Specifications

A4 Punch Dies

SquareFold

Trimmer Module (Optional)

Operation

Customer Expectation and Installation Guide

Overview



The SquareFold® Trimmer Module is an optional piece of equipment that flattens the spine of the

booklet to make it lay flat and trims the face of the booklet. It requires the Light Production C

Finisher with Booklet Maker (with or without the C-Z Folder) that has upgraded software and

hardware. The SquareFold® Trimmer Module is a fully-integrated device, controlled through the

print engine UI.



The SquareFold® Trimmer Module is supported by all color servers.



The SquareFold® Trimmer Module can be added to an existing Light Production C Finisher through

an available upgrade kit.

Configuration



The SquareFold® Trimmer Module is located after the Light Production C Finisher and performs as

follows:



Receives the booklet from the booklet unit



Transports the received booklet to the square fold unit to flatten the spine of the booklet and then to

the trimmer unit to trim the face of the booklet



Deposits the finished booklet to the booklet tray.



The SquareFold® Trimmer Module is also able to face-trim without square-folding



All output from the Light Production C Finisher (Booklet Maker Finisher) can be passed through,

square-folded, trimmed, or both squared-folded and trimmed

Xerox Color

C60/C70