Getting Started Guide
6.
Click on Have Disk, then Browse.
7. Open the appropriate folder for your operating system on the CD-ROM (win95 or
win98), then open the English language folder.
8.
In the English folder, choose the OEMSETUP.INF file, and click OK.
9. When the Add Printer Wizard prompts for the printer model, select one of the
following options, according to the model of the Splash M Series Color Server you
specified in Step 4:
•
Splash M210 v1.0
•
Splash M310 v1.0
•
Splash M410 v1.0
10. Click the Next button.
11. If the Add Printer Wizard prompts you to keep or replace the printer driver software,
select KEEP THE EXISTING DRIVER and click Next.
If you choose Replace the existing driver, the U.S.English print driver will be
installed, overwriting the non-U.S. English print driver.
12. When the Add Printer Wizard prompts for a printer name, type the desired local
logical printer name and append "_hold" if you are adding a hold queue or "_print" if you
are adding a print queue. The reason for adding "_hold" or " _print" is because both
queues are represented on the network as identical printer icons (Figure 7).
Adding "_print" or "_hold" to the name identifies the queue type associated with the
icon.
13. When the Add Printer Wizard asks if you want to print the test page, click Yes. After
the test page prints, click Yes again (even if the test page prints incorrectly).
14. If the Add Printer Wizard aks you if you want to keep any files that are in the
language of your workstation, keep the files.
15. Go to Section 5.2.3, on page 17 to setup the printer.
page-16
SA
SB
SplashM310
M310_hold
M310_print
S1
S2
S3
SplashM410
M410_hold
M410_print
SC
SD
SE
Figure 7: Color Server Queues
0015647-0001 February 18, 1999
ページを印刷する