- ページ 6

プリンター Xerox Phaser 7300のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Xerox Phaser 7300 50 ページ。 Quick reference guide
Xerox Phaser 7300 にも：トラブルシューティングマニュアル (40 ページ), 特徴 (1 ページ), パンフレット＆スペック (4 ページ), インストールマニュアル (2 ページ), 機能マニュアル (40 ページ), サポートマニュアル (28 ページ), 仕様 (15 ページ), 概要 (9 ページ), セットアップとクイック・リファレンス・マニュアル (45 ページ), メンテナンス・マニュアル (11 ページ), クイック・スタート・マニュアル (3 ページ), クイック・スタート・マニュアル (2 ページ)

IP Address

An Internet Protocol (IP) address is required to identify your printer on a network. Use the procedures in

this section to set your printer's IP address.

Automatic IP addressing — see page 1.

Other methods of setting the printer's IP address — see page 1.

Dynamic Domain Name Service (DDNS) — see page 4.

Other sections of the Networking Guide include installation steps for specific operating systems.

The Xerox installer for Windows sets the printer's IP address under the following conditions:

The printer has a network connection.

TCP/IP is installed and configured on the client computer.

The IP address has not already been assigned, for example, from the printer's front panel or by

Dynamic Host Configuration Protocol (DHCP). DHCP is a system in which network servers can

dynamically allocate IP addresses. The printer is a DHCP client; when the printer is reset, it

receives an IP address from the DHCP server.

During the installation process, you can accept the automatically assigned address or assign a different

one. For small networks, the automatically assigned address works in most cases. For large networks,

see your network administrator to determine if the suggested address would work.

Other methods of setting the printer's

IP address

You can set the printer's IP address by any of the following methods:

Front panel

DHCP

CentreWare Internet Services is a printer administration and support tool using web technology.

With CentreWare IS software, you can access printer status and manage your printer over a TCP/

IP network using a web browser.

For UNIX, use a Xerox-provided shell script to prepare a configuration file. Sending the file to the

printer stores the IP address information in the printer's memory, where the printer reads it when

reset.

Phaser® 7300 Color Printer