- ページ 19

プリンター Xerox Tektronix Phaser 860のPDF ネットワーク設定マニュアルをオンラインで閲覧またはダウンロードできます。Xerox Tektronix Phaser 860 42 ページ。 Color printer
Xerox Tektronix Phaser 860 にも：パンフレット＆スペック (4 ページ), メニューマップ (1 ページ), セットアップとクイック・リファレンス・マニュアル (36 ページ), インストレーション・マニュアル (1 ページ)

Setting the Printer's IP Address

The Xerox Installer for Windows sets the printer's IP address under the following

conditions:

The printer has a network connection.

TCP/IP is installed on the computer.

The IP address has not already been assigned (for example, from the front panel or by

DHCP).

During the installation process, you can accept the automatically assigned address or

assign a different one. For small networks, the automatically assigned address will work in

most cases. For large networks, see your network administrator to determine if the

suggested address will work.

The Xerox installer for Windows is the recommended method for setting the IP address in

a Windows environments; for other environments, see Other Methods for Setting the

Printer's IP Address.

Note

With a Windows 95 or Windows 98 peer-to-peer connection, if you change the

printer's IP address after the first-time installation, you must change the port's

address on the PC through PhaserPort for Windows (see page 8).

Networking Setup Guide

Setting the Printer's IP Address