Expectation Setting Document for Fiery ZX-6 v1.1
Digital Front End for 5790 and DocuColor 5750/ 5799
Customer Support
The Xerox Customer Support Centers are available to provide general information, answer questions and take
service calls. You can reach the Customer Support Center at the following toll-free phone numbers:
Your Xerox Color Analyst will provide fee-based training upon request.
General Specifications
Physical and Environmental
Server
Weight
Dimensions
Operating Temperature
Relative Humidity
Altitude
Electrical Requirements and Compliance
Server (assumes optional Command WorkStation is included in system):
Line Voltage
100 to 125 / 200 to 240 VAC RMS single phase, automatically configured
Frequency
50 to 60 Hz single phase
Power
150 W maximum not including monitor
Note: Three power outlets are required when an Optional Command WorkStation is installed with the server.
Server Specifications
DEC 21164 400 MHz Alpha Microprocessor
160 MB RAM
4 GB internal hard drive
12 x internal CD-ROM
10/100 BaseT Network capability
Note: In order to place the Fiery ZX-6 server on the network, the customer must supply a network drop.
Network Specifications
Protocol Stack
Novell IPX / SPX
Novell 3.2
Novell 4.x (Bindery
Emulation)
Novell 4.x (NDS)
Terms and product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
Launch Version
Page 1 of 7
United States
Canada
English Units
58 lbs.
22 x 25.5 x 16 inches
50º - 104º F
5% to 95% (noncondensing)
0 to 10,000 ft.
Printing
Services
PServer
Ethernet 802.2
Ethernet 802.3
Ethernet_II
Ethernet SNAP
Token Ring 802.2 (option)
Token Ring SNAP (option)
PServer
Ethernet 802.2
Ethernet 802.3
Ethernet_II
1-800-821-2797
1-800-939-3769
Supported Frame Types
Metric Units
26.3 kg
52.8 x 61.2 x 38.4 cm
10º - 40º C
5% to 95% (noncondensing)
0 to 3,048 m
Platform
Windows NT 4.0
Windows 95
Windows 3.1*
Windows NT 4.0
Windows 95
Windows 3.1
3 August 1998
zx6_launch_ced.doc
ページを印刷する