- ページ 11

FOLDING

This command indicates an optional fold type generated by the professional finisher. The short edge feed command is also

required to use the booklet fold command.

PJL

@PJL SET JOBATTR = "@FOLD = value1"

Where value1 is one of the following:

BIFOLDINSIDE = Bi-Folding inside per a page

BIFOLDOUTSIDE = Bi-Folding inside per a page

BIFOLDMULTIOUTSIDE = Bi-Folding multiple pages outside

BIFOLDMULTIINSIDE = Bi-Folding multiple pages inside

Note:

The "Collated" feature needs to be enabled for the booklet functions to work.

PJL

@PJL SET JOBATTR = "@BKLT = value1"

@PJL SET JOBATTR = "@BKSG = value2"

@PJL SET JOBATTR ="@BKDN = int1"

@PJL SET JOBATTR ="@BKTP = int2"

Where value1 is one of the following:

NONEDIVIDE = Compile a booklet as long as the number of sheet does not exceed the limit

AUTODIVIDE = Divide sheets into sets automatically in case of exceeding the limit number of sheets.

MANUALDIVIDE = Divide sheets based on the specified limit manually

OFF = Do not compile a booklet

Where value2 is one of the following:

RIGHT = Right to left page order binding

LEFT = Left to right page order binding

Where int1 is:

1-9999 = Booklet dividing number for each set

Where int2 is:

1-9999 = Booklet total pages of document

PJL

@PJL SET RESOLUTION = value

Where value is:

600

dc10cc0466

Customer Support

Page 11