- ページ 3

Scanning the Originals at the System

Follow these steps to scan an image at the system:

Note

To clear the settings from the previous job, press the Clear All button twice.

Load the originals to be scanned. Use either the document glass or the document feeder.

Document Feeder

Insert originals faceup with the top entering

the feeder first. Adjust the paper guides so they

fit against the originals.

Press the Scan button. A list of scanning options appears on the control panel screen.

If desired, change the destination of the scanned images. If you choose a private folder or a

PC name, you may also need to enter the correct numeric password. For information, see

"Setting the Scan Destination" on page 4-6.

Press the Start button on the right side of the control panel.

Unless you changed the destination in Step 3, the image is scanned to the public folder on

the system's hard drive.

Note

If you placed originals in the document feeder, the images are placed in a multi-page

file. Scanning continues until the document feeder is empty.

When you finish scanning to a password protected location, press the Clear/Clear All

button twice. This prevents the next person that uses the system from scanning files to or

deleting files from that location.

2424-076

Document Glass

Lift the document feeder, then place the original

facedown on the back, left corner of the

document glass.

WorkCentre® C2424 Copier-Printer

4-3

Basic Scanning

2424-065