- ページ 2

オール・イン・ワン・プリンター Xerox AltaLink B8075のPDF メンテナンスをオンラインで閲覧またはダウンロードできます。Xerox AltaLink B8075 4 ページ。 Customer training
Xerox AltaLink B8075 にも：はじめに (14 ページ)

ページを印刷する

Replacing the Print Cartridge R2

WARNING Keep print cartridges upright to avoid spillage and do not

place on unprotected surfaces.

1&2. Open the front door. Immediately open and gently lower

the clearance door on the left side of the device using the handle.

Open left side clearance door BEFORE removing R2 Print

Cartridge.

3. Open the new print cartridge box, remove the card liner and

place it next to the box.

4. Open the re-sealable bag, Remove the top packaging and place

it on top of the card liner.

5. Unpack the new print cartridge and place it on top of the

packaging, next to the box.

6. Rotate the orange print cartridge locking lever counterclockwise

until it clicks. The lever is to the right of the print cartridge R2.

7. Lift the orange cartridge handle slightly and pull the cartridge

half out of the device. Lift the carrying handle on the top of the

cartridge and use it to support the weight while you remove it

from the device.

8. Place the old print cartridge in the box the new cartridge came

in and reseal the bag.

9. Insert the new print cartridge into the device using the orange

handle on the top to lift it. Rotate the orange lever clockwise to

latch the print cartridge into place.

10. Close the front door.

11. Close the door on the left side of the device, lift and gently

push it towards the device until you hear it click into place.

Clean the Print Head