- ページ 2

オール・イン・ワン・プリンター Xerox ColorQube 8700のPDF 安全な設置と操作をオンラインで閲覧またはダウンロードできます。Xerox ColorQube 8700 11 ページ。 Color multifunction printer
Xerox ColorQube 8700 にも：仕様 (9 ページ), マニュアル (17 ページ), リファレンス・マニュアル (28 ページ), インストレーション・マニュアル (2 ページ), クイック・ユース・マニュアル (18 ページ), ソフトウェアのアップグレード (36 ページ), クイック・ユース・マニュアル (18 ページ), クイック・ユース・マニュアル (18 ページ), クイック・ユース・マニュアル (18 ページ)

ページを印刷する

Secure Installation and Operation of Your ColorQube™ 8700/8900

Purpose and Audience

This document provides information on the secure installation and operation of a ColorQube™ 8700/8900 Multifunction

System. All customers, but particularly those concerned with secure installation and operation of these machines, should follow

these guidelines.

Overview

This document lists some important customer information and guidelines that will ensure that your machine is operated and

maintained in a secure manner.

Background

This product is currently undergoing Common Criteria evaluation. The information provided here is consistent with the security

functional claims made in the Security Target

the Common Criteria Certified Product website (http://www.commoncriteriaportal.org/products.html) list of evaluated

products, from the Xerox security website (http://www.xerox.com/information-security/common-criteria-certified/enus.html ), or

from your Xerox representative.

1. Please follow the guidelines below for secure installation, setup and operation of the evaluated

a). The security functions in the evaluated configuration that should be set up by the System Administrator are:

•

Immediate Image Overwrite

On Demand Image Overwrite

•

Disk Encryption

FIPS 140-2 Encryption

•

IP Filtering

•

Audit Log

•

SSL

IPSec

•

Local, Remote or Smart Card Authentication

•

Local Authorization and Personalization

802.1x Device Authentication

•

Session Inactivity Timeout

System Administrator login is required when accessing the security features via the Web User Interface (Web UI) or when

implementing the guidelines and recommendations specified in this document. To log in to the Web UI as an authenticated

System Administrator, follow the instructions under "Initial Setup in CentreWare Information Services" located on page 19

in the System Administration Guide (SAG)

To log in to the Local User Interface (Local UI) as an authenticated System Administrator, follow the "System Administrator

Access at the Control Panel" instructions located on page 18 in the SAG.

Follow the instructions located in the SAG in Chapter 4, Security to set up these security functions except as noted in the

items below. Note that whenever the SAG requires that the System Administrator provide an IPv4 address, IPv6 address or

port number the values should be those that pertain to the particular device being configured.

b). The following services are also considered part of the evaluated configuration and should be enabled when needed by the

System Administrator - Copy, Embedded Fax, Fax Forwarding on Receive (for received Embedded Faxes), Scan to E-mail,

Workflow Scanning, Scan to Mailbox, Scan to USB, Print from USB and Print from Mailbox.

Secure acceptance, once device delivery and installation is completed, should be done by:

•

Printing out a Configuration Report by following the "Configuration Report" instructions located on page 17 of the SAG.

Comparing the software/firmware versions listed on the Configuration Report with the Evaluated Software/Firmware

•

versions listed in Table 2 of the Security Target, latest version issued and make sure that they are the same in all cases.

c). Change the Administrator password as soon as possible. Reset the Tools password periodically.

(1) Set the Administrator password to a minimum length of eight alphanumeric characters, (2) change the Administrator

password once a month and (3) ensure that all passwords are strong passwords (e.g., passwords use a combination of

alphanumeric and non-alphanumeric characters; passwords don't use common names or phrases, etc.).

Xerox ColorQube™ 8700/8900 Security Target, Latest Version issued

The term "evaluated configuration" will be used throughout this document to refer to the configuration of the machine that is currently

undergoing Common Criteria evaluation.

Xerox

ColorQube

8700 / 8900 System Administrator Guide, Version 1.0: February 2012

. Upon completion of the evaluation, the Security Target will be available from

configuration

[XC1]