Fax Send
Must use with the FAX_SEND Job Type command.
Required Commands
PJL COMMENT Command
@PJL COMMENT OID_ATT_JOB_TYPE
OID_VAL_JOB_TYPE_FAX_SEND;
@PJL COMMENT
OID_ATT_FAX_DESTINATION_PHONE
"xxxx";
Where xxxx is the phone number and any special access numbers. If a dialing prefix is added, it must be
immediately followed by a pause (comma) character. Each fax number can be up to 30 characters in
length.
Optional Commands
@PJL COMMENT
OID_ATT_FAX_COVER_SHEET string;
Where string is TRUE or FALSE
@PJL COMMENT
OID_ATT_FAX_CONFIRMATION_SHEET
string;
Where string is TRUE or FALSE
@PJL COMMENT
OID_ATT_FAX_RESOLUTION int;
Where int is:
0 – Fine Resolution
1 – Standard Resolution
2 – Super Fine Resolution
@PJL COMMENT OID_ATT_FAX_TYPE
OID_VAL_FAX_TYPE_string;
Where string is:
G3_AUTO = Super G3 (33.6kbps)
G3_14400 G3 = (14.4kbps)
G3_FORCED_4800 = Forced 4800 bps)
@PJL COMMENT OID_ATT_CREDIT_CARD "xxxx";
xxxx
Where
is the credit card or charge code required to send the fax. Select this option and enter the credit
card number (up to 16 digits) if you want to charge the fax call to a credit card. The credit card number is
concealed on confirmation reports.
Characters for phone numbers, prefix numbers, credit cards, and other numeric entries.
* Begin DTMF
# End DTMF
: Switch to DTMF mode
= Wait for dial tone.
! Used to designate a mailbox signal.
, Used to initiate a pause period; default pause period is 3 seconds.
/ Used to delineate private data.
$ Signifies to wait for a confirmation dial tone.
<1> Use preceding a fax number to specify which fax line should be used on systems that support dual fax lines.
<2> Use preceding a fax number to specify which fax line should be used on systems that support dual fax lines.
CQ8700-8900
Customer Support
DSC Comment Command
%%OID_ATT_JOB_TYPE
OID_VAL_JOB_TYPE_FAX_SEND;
%%OID_ATT_FAX_DESTINATION_PHONE "xxxx";
%%OID_ATT_FAX_COVER_SHEET string;
%%OID_ATT_FAX_CONFIRMATION_SHEET string;
%%OID_ATT_FAX_RESOLUTION int;
%%OID_ATT_FAX_TYPE
OID_VAL_FAX_TYPE_string;
Page 7
ページを印刷する