- ページ 21

オール・イン・ワン・プリンター Xerox DocuColor 7002のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox DocuColor 7002 28 ページ。 Digital press
Xerox DocuColor 7002 にも：パンフレット＆スペック (8 ページ), パンフレット＆スペック (8 ページ), 安全マニュアル (18 ページ)

ページを印刷する

DocuColor 7002/8002

High Capacity Stacker 80 (HCS80)

Perform the following steps to clear the HCS80 jam in the Bypass area and resume printing.

1. Remove any paper from the Top Tray.

2. Lift the HCS80 Top Cover.

3. Lift the green handle, or handles, indicated on the UI and remove all paper in the Bypass

area. Remove paper only from the areas indicated.

4. Close each green handle.

5. Close the HCS80 Top Cover.

6. If the UI indicates there is a jam in the digital press, follow the instructions on the screen to

remove any paper in the area indicates. Refer to the Jam Clearance section in the Problem

Solving chapter in this manual.

7. Follow the instructions displayed on the digital press UI to resume printing.

High Capacity Stacker/Stapler (HCSS)/Common Stacker/Stapler

(CSS)

Read the following steps for more information on how to clear a jam.

1. Open the finisher Front Door. There are three possible jam areas. Handle 1 moves down,

handle 2 moves to the right, and handle 3 moves up

2. Remove all jammed paper only from the area indicated on the Touch Screen and the

finisher Control Panel Display. Do not remove paper from any other areas.

3. Reposition the handle.

4. Close the finisher Front Door.

Quick Start Guide

Exercises