- ページ 42

オール・イン・ワン・プリンター Xerox DocuPrint 90のPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Xerox DocuPrint 90 48 ページ。 Tape client job submission guide enterprise printing system
Xerox DocuPrint 90 にも：はじめに (28 ページ), プランニング・マニュアル (22 ページ)

ページを印刷する

Managing the Tape Client

Managing the tape drive

Renaming a tape

drive

3-4

In the Input Device group box on the Tape Client window, you

can initiate the following tasks to manage the tape drive from

which you are sending jobs.

If you have more than one tape drive connected to your printer,

you must select the drive that you want to use to send the job.

When the printing system is installed and your tape drives are

configured on it, the system names them "Tape 0," "Tape 1," etc.

If you want to assign a different name to a tape drive, follow

these steps:

1. On the Tape Client window, select the drive that you want to

rename from the Device menu.

2. Click Rename.... The Rename Device window opens,

displaying in the Old Name field the name of the drive that

you selected.

Figure 3-3. Rename Device window

3. In the New Name text field, enter the name you want to give

the tape drive.

4. Click OK. The Rename Device window closes, and the new

drive name is displayed on the Device menu.

NOTE: The renaming of the tape drive applies to the Tape Client

window, not to the DocuSP window.

Tape Client Job Submission Guide