- ページ 15

コピー機 Xerox 5760のPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox 5760 44 ページ。 Majestik color series digital color copier / printer
Xerox 5760 にも：補足マニュアル (1 ページ), リファレンス・マニュアル (7 ページ), リファレンス・マニュアル (4 ページ), リファレンス・マニュアル (18 ページ), 仕様 (7 ページ)

Hole-Punched Papers

MAJESTIK 5760/5765 MATERIALS USAGE GUIDE

Material Description & Expectations

Hole-Punched Papers have two or more holes along one edge for

use in ring binders and notebooks. This paper is often referred to as

predrilled paper. Most hole-punched papers that fit into the

standard paper size and weight ranges for the 5760/5765 should run

reliably. The recommended papers meet Xerox's high quality

standards and will provide reliable feeding and good image quality.

Recommended Materials

Xerox 24 lb Image Series LX, 3 hole drilled , 8.5 x 11" = 3R3875

Xerox 20 lb 4024 DP, 3 hole drilled , 8.5 x 11" = 3R2193

Xerox 20 lb Image Series DP, 3 hole drilled , 8.5 x 11" = 3R3016

Xerox 20 lb Recycled, 3 hole drilled , 8.5 x 11" = 3R5131

1 2 3. . .

Steps for Success

1 Load non-heavy-weight, hole-punched papers in paper trays 1, 2,

and 3 with the holes to the right.

2 Load all heavy-weight, hole-punched papers (greater than 28 lb

bond, 105 gsm) in the Paper Tray Bypass with the holes to the

left.

3 Do not attempt to copy an image onto the area of the holes. This

will cause unwanted toner on the back of the copies/prints and

may lead to machine damage.

4 When copying from a hole-punched original onto hole-punched

paper, the holes on the original must be masked or edited away

to prevent them from printing out on the copies/prints. (See

complete instructions in the Hints & Tips section below.)

Hints, Tips & Testing Results

Xerox testing has shown the following:

•

When copying from a hole-punched original onto hole-punched

paper, special actions must be taken to prevent the holes from

printing out as dark spots on the copy/print. These spots can be

eliminated by using the Image Shift, Edge Erase, or Delete

Outside editing features of the 5765 (or 5760 with an edit

configuration) to edit the holes away. Another option, without

editing, is to cover the holes on the original by placing a clean

white sheet behind the original before copying.

•

If an image is copied over the area of the holes, toner will

transfer through the holes and onto the Charge/Transfer roll

film. This excess toner will be transferred onto the back of

copies/prints when the next job is run. Permanent fuser

damage can occur if this is done repeatedly.

USAGE GUIDELINES