- ページ 6

コピー機 Xerox DocuColor 252のPDF リリースノートをオンラインで閲覧またはダウンロードできます。Xerox DocuColor 252 41 ページ。 Docucolor advanced multifunction
Xerox DocuColor 252 にも：機能マニュアル (12 ページ), ユーザーマニュアル (32 ページ), 仕様 (8 ページ), 評価者マニュアル (14 ページ), 評価者マニュアル (16 ページ)

ページを印刷する

SNMP limitations

If you change the community name or disable SNMP, WebTools does not work. For your

changes to take effect, you must shut down the Fiery Color Server through its Control Panel,

wait 10 seconds, and then power it back on by pressing the power button on the front panel.

If you disable SNMP, the automatic search for the Fiery feature in Command WorkStation,

which is based on SNMP, does not work.

If you disable SNMP, the following features are affected:

• Two-Way Communication

• All Fiery Color Server applications that search for Fiery Color Server controllers using

SNMP (Command WorkStation, Remote Scan, and Client Driver Two-way

communication)

• Job monitoring

• Xerox CentreWare

• Xerox MIBs

After you change and save the community name, a Login window appears. To validate the

changes, enter "Admin" as the User Name and the Administrator password in Command

WorkStation.

Disabling IPP printing

IPP printing version 1.0 (rfc 2566) can use the IPP (port 631) or HTTP (port 80) protocols.

To disable IPP printing on the Fiery Color Server, open WebTools and go to Network

Services, Web Setup. Clear the Enable IPP option.

To disable IPP printing only at port 631, browse the information at this address:

http://<ipaddress>/cgi-bin/ss_cgi/ss.cgi

and use the Port Blocking feature to block IPP printing port 631. IPP printing at port 80 is

still enabled in this case.

You can disable IPP printing by clearing the Enable IPP option in Fiery Setup

OTE

(Network > Services > Web). You can also disable IPP Printing by clearing the Enable IPP

option at the copier touch panel Web Applications, Setup, SMB, LPD, Web screen. After you

reboot the server, Web Services comes back on by default, but IPP printing stays disabled.

Page 6