- ページ 39

コピー機 Xerox Majestik 5765のPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox Majestik 5765 44 ページ。 Majestik color series digital color copier / printer
Xerox Majestik 5765 にも：補足マニュアル (1 ページ), リファレンス・マニュアル (7 ページ), リファレンス・マニュアル (7 ページ), リファレンス・マニュアル (18 ページ), 仕様 (7 ページ)

ABOUT PAPER

Grain

The grain of a paper is the direction in which most of the fibers lie.

During the paper-making process, the majority of the paper fibers

align parallel with one another. Depending on how the paper is cut

to its finished size, it will be either grain-long (the grain is parallel to

the longer dimension of the paper), or grain-short (the grain is

parallel to the shorter dimension of the paper).

One method used to determine the grain is to fold a sheet of paper

lengthwise, then make a crosswise fold. Compare the two folds.

Paper folds smoothly with the grain. Cross-grain folds tend to be

rough and cracked.

Another method you can use to determine the grain direction of a

sheet of paper is to tear the sheet widthwise. Paper always tears

straighter with the grain.

Grain direction is critical when running heavy-weight papers in the

5760/5765. Heavy-weight papers (greater than 28 lb (105 gsm)

bond) must be loaded in the Paper Tray Bypass with the grain

direction parallel to the leading edge of the sheet.

Stiffness

Stiffness refers to the rigidity, or bending resistance, of paper.

Thicker papers are usually stiffer. Papers are normally stiffer in the

grain-short direction.

In general, paper that is less than 16 lb (60 gsm) is more likely to

bunch up or wrinkle in the copier/printer, causing jams and

misfeeds. Heavier weight papers, over 28 lb (105 gsm), may have

runability problems as well as print quality defects (skips, blurs,

deletions) due to their reduced ability to bend around the transfer

drum.

Usually, reliable feeding rates can be obtained on the 5760/5765 by

feeding lightweight paper, 16 lb (60 gsm) to 20 lb (80 gsm), with the

grain direction the same as the feed direction. This will increase the

stiffness. When feeding heavier weight paper, 32 lb bond to 90 lb

Index (120 to 163 gsm), the grain direction should be the opposite of

the feed direction to decrease stiffness.

Buying tip

Because 11 x 17 inch paper must be fed short-edge first, purchase

only grain-long lightweight papers, 16 lb (60 gsm) to 20 lb (80 gsm).

MAJESTIK 5760/5765 MATERIALS USAGE GUIDE