- ページ 5

コピー機 Xerox WORKCENTRE 5775のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Xerox WORKCENTRE 5775 32 ページ。 Smart card
Xerox WORKCENTRE 5775 にも: 情報マニュアル (50 ページ), 評価者マニュアル (24 ページ), データシート (18 ページ), インフォメーションシート (8 ページ), 安全な設置と操作 (11 ページ), ユーザーマニュアル (5 ページ), ユーザーマニュアル (8 ページ), コピーの作り方 (10 ページ), インストレーション・マニュアル (43 ページ)

Xerox WORKCENTRE 5775 スタートマニュアル

Device Overview

2
10
1
5
3
6
4
Control Panel: Touch Screen and Numeric
1
Keypad.
Document Feeder and Document Glass: Used
2
for scanning single or multiple documents. The
document glass can be used for scanning single,
bound, custom size or damaged documents.
Paper Trays 1 and 2: These trays are standard
3
on all models. Trays 1 and 2 are fully adjustable
and can be used for media sizes 5.5x8.5" to
11x17"(A5 to A3).
Paper Trays 3 and 4: These trays are high
4
capacity paper trays. Trays 3 and 4 are dedicated
trays used for 8.5x11" or A4 size media.
Bypass Tray: Used for non-standard printing
5
media.
Paper Tray 5: This is an optional high capacity
6
paper tray. It is a dedicated tray used for 8.5x11"
or A4 long edge feed size media. Optional kits
are available to accommodate 11x17", A3,
8.5x14", 8.5x11" or A4 Short Edge Feed (SEF)
media.
Tray 6 (Inserter): An optional paper tray for use
7
with the High Volume Finisher. It is used to insert
pre-printed sheets into copy sets. It is not part of
the printing process and cannot be used for
imaging.
7
8
9
8
9
10
11
12
13
14
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
11
12
High Volume Finisher: This optional finisher
collates, offsets, stacks and staples your output.
Booklet Maker, Tri-fold and Hole Punch kits can
be installed with this finisher.
Booklet Maker and Trifolder: These are optional
devices which can be installed with the High
Volume Finisher to staple and fold booklets or
leaflets.
Convenience Stapler: This optional device
provides manual stapling of up to 50 sheets. The
Convenience Shelf must also be fitted.
Offset Catch Tray: Delivers output collated or
uncollated. Each set or stack will be offset from
the previous to enable easy separation.
Basic Office Finisher: This optional device
stacks, collates, staples and offsets your output.
Office Finisher: This optional device stacks,
collates, staples and offsets your output. Hole
punch kits are also available for this finisher.
Document Glass Cover: This is a flat hinged
cover for the document glass. It is fitted instead
of the document feeder and is standard on some
configurations.
Device Overview
13
14
11
Getting Started