- ページ 20

コピー機 Xerox XC355のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Xerox XC355 39 ページ。 User guide
Xerox XC355 にも：ユーザーマニュアル (50 ページ)

Setting Copy Exposure Range

The exposure settings, Light, Auto and Dark can be adjusted. This can be

useful when copies are consistently too dark or too light. These new

settings will remain until they are manually changed again.

Note: In the following procedure, it is important to complete step 2

immediately after step 1, as the copier will return to the ready mode in

approximately 10 seconds.

Approximately 5 seconds after selecting the appropriate indicator the

exposure indicator will go out, the auto and ready indicators will light, and

the new copy exposure range will be set.

Note: Pressing the Stop/Clear button will have no effect during this

procedure.

1. Press and hold the Exposure button

2. Press and release the Exposure button

XC353, XC355 and XC356 Copiers only

until the indicator for the current

exposure setting starts to flash

(approximately 10 seconds).

until the flashing light is under the

indicator for the appropriate exposure

range.