- ページ 32

プリンターアクセサリー Xerox 3100MFPX - Phaser B/W LaserのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Xerox 3100MFPX - Phaser B/W Laser 36 ページ。 Dect phone installation instructions
Xerox 3100MFPX - Phaser B/W Laser にも：ユーザーマニュアル (2 ページ), 評価者マニュアル (12 ページ), インストレーション・インストラクション (2 ページ)

ページを印刷する

ETTINGS

During the registration process (up to

one minute), the LCD screen displays

HANDSET

REGISTRATION

message disappears once registration is

complete.

If the registration process fails (for

example, the handset left the

registration mode too soon), the

machine emits a 3-beep signal. In

this case, repeat the procedure from

step 1.

The new handset and the base are mutually

searching for each other. The registration

may take several seconds.

Once the handset is registered, the handset

automatically exits the registration mode and

lets you know the registration is done.

You can also set your base to the

registration mode using a handset

already registered by selecting the

Registration function in the menu

SETTINGS/ADVENCED SET./SET

BASE.

ASE SETTINGS

The

Using a handset to put the base

in registration mode

This function enables you to put the base in

registration mode so you can register a new

handset. To do so, the handset to be

registered must be in registration mode (refer

to paragraph Registering a new handset to

a terminal, page 30).

On the navigator key

until the SETTINGS screen is displayed,

press OK to confirm.

Select ADVANCED SET. using

Press Valid.

Select SET BASE using

Valid.

Select REGISTR. MODE using

Press Valid.

A screen prompts you to confirm the setting

of the base to the registration mode. Press

Yes

indicator light on your base starts to quickly

blink green.

Your base will remain in registration mode for

about 1 minute.

(

TERMINAL

, press

to enter the registration mode. The

)

. Press