- ページ 14

プリンターアクセサリー Xerox DocuColor 40のPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Xerox DocuColor 40 17 ページ。 High speed paper-backed transparencies
Xerox DocuColor 40 にも：マニュアルの使用 (12 ページ), リファレンス・マニュアル (13 ページ), 設定マニュアル (8 ページ), 設定マニュアル (4 ページ), 使用方法 (1 ページ)

Customer Expectations Setting Guidelines

Xerox DocuColor 40/30 Family Digital Color Production System

ENVIRONMENTAL AND ELECTRICAL REQUIREMENTS

DocuColor 40/30

Environmental

Temperature ( F)

Relative Humidity (% RH)

Altitude (Feet above sea level)

Better performance is achieved when conditions are maintained between 65 - 75 F and 25 - 60% RH.

High altitude performance (above 5,000 feet) has not been certified.

Max. Power Consumption

Printing: 2.6 kW or less in full system

Standby: 1.8 kW

Current loads:

220 VAC assumed

Printing: 11.8 Amps

Standby: 8.2 Amps

Electrical Specifications:

Single phase - Two wire plus safety ground

Current Service - 30 Amps (Sole Use)

Frequency - 50/60 Hz

Accessories

Electrical Specifications:

The following power requirements apply to the Stacker/Stapler, High Capacity Feeder, and the ASF 40 System:

115 VAC for 60Hz or 220 VAC for 50Hz installations (90 to 256VAC in both 50Hz and 60Hz installations.)

Note: Power cords are provided with Stacker/Stapler, HCF, ASF 40, and Accumulator/Rotator.

Note: DocuColor 40/30, Stacker/Stapler, HCF and ASF 40 and the ASF 40 Accumulator/Rotator require separate power sources.

Note: ASF 40 and ASF 40 Trimmer use the same power source.

Minimum

50 F (10 C)

20%

None

8875 BTU / Hr

6143 BTU / Hr

2.6 kVA (approx.)

1.8 kVA (approx.)

Maximum

90 F (32 C)

85%

5,000 Feet

Version 6.0

09/08/99