- ページ 12

プリンターアクセサリー Xerox DocuPrint C3055 DXのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Xerox DocuPrint C3055 DX 33 ページ。 Internal hard disk
Xerox DocuPrint C3055 DX にも：インストレーション・マニュアル (8 ページ), インストレーション・マニュアル (16 ページ), 設定マニュアル (20 ページ), インストレーション・マニュアル (16 ページ)

Setting the ESC/P Mode

2.1

There are two types of control panel menus: the mode menus and common menus. The

mode menus are the menus that relate to the emulation modes. The common menus are

the menus for all the other features of the printer.

Note

• On the DocuPrint C3055, [PostScript] (mode menu) is displayed only if the PostScript software kit

(optional) is installed.

Press the <Menu> button

The common menu items that relate to the ESC/P emulation mode are as follows:

Refer to

• For more information about the common menu items, refer to the 'User Guide'.

Network / Port

To display this item, select [Admin Menu] > [Network / Port].

This item allows you to set the ports to be used in the ESC/P emulation mode.

• Port Status (Parallel/LPD/NetWare/SMB/IPP/USB/Port9100)

Enables the ports to be used in the ESC/P emulation mode. By default, all ports are set

to [Enable].

• Print Mode (Parallel/LPD/NetWare/SMB/IPP/USB/Port9100)

Sets the print mode of each port to [ESC/P] or [HexDump]. By default, all ports are set to

[Auto].

Note

• [Print Mode] allows you to set the method of processing data received from host interfaces. If you set

this to [ESC/P], the printer will not auto-switch languages as described in "Switching Languages

Automatically" (P. 8).

2 Setting the ESC/P Mode

Common Menus

Mode Menus

ESC/P

extension

menu items

extension

menu items

extension

menu items

PostScript

extension

menu items

PDF

PCL