- ページ 21

プリンターアクセサリー Xerox PHASER 5400のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox PHASER 5400 40 ページ。 1000-sheet stacker
Xerox PHASER 5400 にも：テクニカル・インストラクション (5 ページ), マニュアル (11 ページ), インストレーション・インストラクション (2 ページ), ペーパーマニュアル (2 ページ)

24.

The Completing the Add Printer Wizard window appears. If all

the data presented is correct, click the Finish button. If not, click

the <Back button to correct any errors.

25.

Wait for the Test Print to print. A new dialog asks for

confirmation of the Test Print; click Yes.

26.

Send a print job to the printer.

27.

Check the print job for print-quality. If print-quality problems

exist, use the print-quality section of your printer's Advanced

Features and Troubleshooting Manual to correct the problem.

28.

If your print job did not print, see the Troubleshooting section for

your operating system in the Advanced Features and

Troubleshooting Manual to correct the problem.

Note

Printers connected to a Windows 2000 network with TCP/IP

protocol enabled, can use a web browser to monitor and

configure your printer. Refer to the section in this document

entitled Internet Printer Services.

Note

For installing or managing multiple printers on a Windows

2000 network with TCP/IP protocol enabled, you can use the

Xerox CentreWare MC snap-in to Microsoft Management

Console. Refer to the Xerox CentreWare MC User Guide.

Quick install steps (Xerox TCP/IP Port Monitor)

Insert your printer's CD-ROM into your computer's CD-ROM

drive. If your PC is set to autorun, a CD Navigator Utility should

automatically start. If it does not start, then:

Click Start and Run.

In the Run window, type: <CD drive>:\SETUP32.EXE.

Select your desired language from the available list.

Quick Network Install Guide