- ページ 27

プリンターアクセサリー Xerox Versant 4100 PressのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Xerox Versant 4100 Press 44 ページ。 Customized envelope feeder

REP 4.8 Separator Adjustment Procedure

Overview

The gate assembly pre-shingles the product to help the feed belts move one piece of product

at a time based on the gap between the gate assembly and the feed belts. Pre-shingling helps

the gate to efficiently separate and single-out the product. The gap between the gate and the

feed belts is adjustable to accommodate different product thicknesses.

The discharge belts are located under the hold down assembly.

Combined with the hold down assembly, the discharge belts provide the friction necessary to

pull the piece of product away from the gate assembly, resulting in a gap between each piece

of product as it leaves the gate assembly area.

When feeding product with varying thickness throughout a single piece of product, it may be

necessary to loosen both adjustment rollers one or two full turns allowing the gate to "float."

Purpose

Adjust the gate assembly so only a single piece of product at a time passes under the gate.

Procedure

Turn the power switch to O (off) and remove the power cord from the power source.

Turn the gate assembly adjustment knob to raise or lower the gate assembly to create

a gap greater than the thickness of one piece of product.

Xerox Customized Envelope Feeder – Problem Solving Guide

4-9