ソフトウェア Xerox DocuPrint 115のPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox DocuPrint 115 2 ページ。 Tape client job submission guide enterprise printing system
Xerox DocuPrint 115 にも：操作マニュアル (38 ページ), 仕様 (2 ページ), 操作マニュアル (34 ページ), プランニング・マニュアル (20 ページ), クイック・リファレンス (2 ページ), 補足マニュアル (48 ページ)

ページを印刷する

Duty cycle

Targeted impressions per month on the Xerox

DocuPrint 100/115/135/155/180 EPS:

Printing system

Minimum

Maximum

DP100

800 thousand

3 million

DP115

1 million

3.5 million

DP135

1.2 million

4 million

DP155

1.4 million

4.5 million

DP180

1.8 million

6 million

Note: Usage outside these ranges may vary the

service frequency.

Performance

Reliability performance of the Xerox DocuPrint 100/

115/135/155/180 EPS for the targeted impressions per

month:

Average

service

monthly

calls per

month

volume

DP100

DP115

DP135

DP155

2.7

2.6

2.5

2.6

million

5.4

5.2

5.0

5.2

million

8.1

7.8

7.5

7.8

million

10.0

10.4

million

Note: Variables other than monthly print volume affect

the average number of service calls. Please contact

your local Xerox representative for more information.

Resolution

DP 155 and 180: 600 by 2400 dots per inch (dpi)

DP 100, 115, and 135: 600 by 600 dots per inch (dpi)

Speed

The speed at which data can be printed on the Xerox

DocuPrint 100/115/135/155/180 EPS:

Pages per minute

Printing system

(standard)

DP100

100

DP115

115

DP135

135

DP155

155

DP180

180

Note: Throughput rates can vary depending upon job

complexity and system configuration.

* Requires optional 7 by 10 inch enablement kit.

Paper handling

•

Paper weights: 16 lbs. / 65 gsm bond to 110 lbs. /

200 gsm index cut-sheet weights

•

Paper sizes:

month

DP180

–

8 x 10 in. / 203 x 254 mm to

14.33 x 17 in. / 364 by 432 mm, including A4 and A3

2.4

–

7 x 10 in. / 178 x 254 mm with optional 7 x 10 in.

enablement kit

4.8

Input

•

Main tray (Tray 1): 1100 sheet capacity of 20 lbs. /

7.2

80 gsm bond paper

•

Auxiliary tray (Tray 2): 600 sheet capacity of 20

9.6

lbs. / 80 gsm bond paper

The Xerox DocuPrint 100/115/135/155/180 EPS may

have up to six input trays: two processor trays and two,

three, or four high-capacity feeder trays.

Output

14.4

•

Output bin: Each output bin has a capacity of 2500

sheets of 20 lbs. / 80 gsm bond with offset

capability.

Two output bins are standard, with up to two

additional bins available as options.

•

Sample tray: 100 sheets of 20 lbs. / 80 gsm bond

Refer to Helpful Facts About Paper to help in selection

of preprinted forms, perforated stock and labels.

Controller components

•

Processor (system unit):

–

One or two UltraSPARC central processing unit

(CPU) modules

Pages per minute

(using 7 x 10 in. /

–

1 or 2 GB of memory (one or two 1-GB Dual In-line

178 x 254 mm

paper) *

Memory Modules, or DIMMs)

–

36 or 73 GB hard disk drive

100

–

High-density, read-only DVD-ROM drive

115

–

Diskette drive: uses 3.5 inch, 1.44 MB, double-sided,

154

high-density diskettes

–

Ethernet

155

–

1 or 2 Printer Controller Interface (PCI) boards

206

–

PGx64 or XVR-100 video graphics board

•

Universal Serial Bus (USB) keyboard and mouse

•

17-inch flat panel monitor

Note: This configuration may change due to the Xerox

policy of staying up to date with current technology.

Supported client workstations

Xerox DP 100/115/135/155/180 EPS supports the

following types of networked client workstations and

operating systems:

•

Sun Workstation running Solaris 2.3 or higher

•

PC running MS-DOS 5.0 or higher, using Ethernet

with TCP/IP or Novell NetWare, and Windows 95/

98, NT, Millennium, 2000, or XP

•

PC running MS-DOS 5.0 or higher, with one or more

of the following TCP/IP packages:

–

PC/TCP Network Software by FTP Software, Inc.

–

Pathway Access by Wollongong Group, Inc.

–

PC-NFS by Sun Select

•

Apple Macintosh, System 7 or higher, using

AppleTalk through EtherTalk

•

Any system that supports RFC-1179 lpr/lpd

PDL compatibility

The system interprets the following data formats:

•

PostScript levels 2 and 3

•

PCL5e and PCL6

•

LCDS

•

ASCII

•

PDF

•

TIFF

•

VIPP

•

IPDS (currently not available)

Interface requirements

One or more of the following network communications

systems may be used to transport documents from a

client or host to the printing system.

•

Ethernet LAN running TCP/IP, AppleTalk, or Novell

NetWare network protocol software

•

Online – Bus and tag supporting IBM 3211/4245

interface*

•

Token ring LAN running TCP/IP, Novell 3.x, or

AppleTalk network protocol software*

* Requires additional equipment.

Installation considerations

•

Data cable: The controller can be separated up to

the length of the data interface cables that connects

them.

–

20 foot / 6.1 meters, or

–

Optional 50 foot / 15.2 meters

•

Power cable lengths are as follows:

Controller:

8 feet / 2.4 m

Printer:

15 feet / 4.6 m

•

Cable length loss must be factored in if equipment is

installed in a raised-floor environment. Part of the

cable length is routed inside the equipment to

connect with interior power receptacles.

•

All power cords attach to the back of the printer.

Listed below are the distances of the printer power

cord attachments from the left end of the printer as

you face it:

–

Cord #1: 36 inches / 914 mm

–

Cord #2: 23 inches / 584 mm (DP 155 & 180)

Special considerations

•

Transference of the black toner to poly-vinyl

surfaces is a common occurrence.

•

When printing edge to edge, there is a 3 to 4.8 mm

border around the sheet where degraded image

quality may occur.

•

Edge marking should be no closer than 4.8 mm from

the edge of the sheet.

•

Xerox carbonless paper is approved for Xerox

DocuPrint 100/115/135/155/180 EPS. Refer to the

Xerox Supplies Catalog for the reorder numbers.

•

Appearance of very small spots is a common

occurrence on all xerographic printers. Consult your

Xerox service representative for details on

acceptable spot occurrence specifications.