- ページ 20

ソフトウェア Xerox DocuPrint 135のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Xerox DocuPrint 135 38 ページ。 Tape client job submission guide enterprise printing system
Xerox DocuPrint 135 にも：仕様 (2 ページ), 操作マニュアル (34 ページ), リファレンス・マニュアル (2 ページ), プランニング・マニュアル (20 ページ), リファレンス・マニュアル (42 ページ), クイック・リファレンス (2 ページ), 補足マニュアル (48 ページ)

Product overview

Operating system software

Network Printer Series (NPS) and IPDS Printing System (IPS) overview

1-2

The NPS/IPS Extension consists of two components that are

easily added to your printing system:

•

Hardware: An external fixed disk drive

•

Software: NPS/IPS 8.0 operating system software

You can switch between print modes by performing a few simple

steps. This procedure is described in chapter 3, "Changing print

modes."

The DocuPrint 100/115/135/155/180 EPS operates from the

standard internal fixed disk drive, and the EPS software release

level must be 2.10.00 or higher. The DocuPrint NPS/IPS

operates from an external fixed disk drive, and the NPS/IPS

software level must be 7.4.1 or higher.

The DocuPrint NPS/IPS enables personal computer (PC), Sun

workstation, DEC workstation, HP/Apollo, IBM RS/6000, and

Apple Macintosh users to print PostScript level 2, HP PCL5e, or

ASCII documents. These documents are then submitted to the

printing system over a network connection.

The system also enables IBM hosts running appropriate levels of

PSF to print IPDS data. The NPS/IPS emulates an IBM AFP

Group 3 Page Printer with the Advanced Function Image and

Graphics (AFIG) option.

The DocuPrint NPS/IPS can receive data at 240 or 300 dpi and

full-page IOCA images at 600 dpi. The system can also use 600

dpi fonts. All 240 or 300 dpi resources are interpolated to 600 dpi

by the printing system for higher print quality.

For more detailed DocuPrint NPS/IPS product information, refer

to the DocuPrint NPS/IPS System Overview Guide.

NPS/IPS Extension Operations Guide