- ページ 17

ソフトウェア Xerox DocuPrint 135のPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Xerox DocuPrint 135 48 ページ。 Tape client job submission guide enterprise printing system
Xerox DocuPrint 135 にも：操作マニュアル (38 ページ), 仕様 (2 ページ), 操作マニュアル (34 ページ), リファレンス・マニュアル (2 ページ), プランニング・マニュアル (20 ページ), リファレンス・マニュアル (42 ページ), クイック・リファレンス (2 ページ)

Supported tape

drives

Tape Client Job Submission Guide

Tape Client overview

This chapter provides an overview of the features and functions

of the Xerox DocuPrint 2000 Series Enterprise Printing System

LCDS Tape Client software.

For offline operations, the input medium to the system is

magnetic tape, which may be recorded in one of a variety of

standard vendor formats. Offline printing is handled by the Tape

Client software, which is an optional part of the system software.

To submit a tape job, you set up the job on the Tape Client

window on the controller and click START. The job is submitted

to the printer through the Socket Gateway. (Refer to chapter 2,

"Managing and printing jobs from the Tape Client," for job setup

and submission procedures.)

The system software enables you to submit LCDS print jobs from

tape on a cartridge or open reel tape drive and print them on the

system.

You can submit offline jobs from the Xerox 18/36-track cartridge

tape drive that is offered as an option with the system from a

Xerox peripheral cabinet tape drive, or from other 9-track or 36-

track serial tape drives of the following supported types:

•

Cartridge tape drives: 3480, 3490, 3490e, 3590

•

Open reel drive: 9914

The following tapes are supported by the Tape Client:

•

18/36 track cartridge

•

9-track open reel

NOTE: The 26-track quarter-inch cartridge tape drive that is

provided with the system cannot be used for submitting jobs

through the Tape Client. It is used only for loading resource files.

1-1