- ページ 8

ソフトウェア Xerox iGen3のPDF パンフレットをオンラインで閲覧またはダウンロードできます。Xerox iGen3 8 ページ。 Solutions planning guide
Xerox iGen3 にも: プランニング・マニュアル (38 ページ)

Printing Speed – iGen4™
Up to 6,600 full process color A4 (letter)
4/0 impressions per hour (110 impressions
per minute)
1,500 A3 (tabloid) 4/4 sheets per hour

Image Quality

Resolution
600 x 4800 dpi
Line screens
150 lpi, 175 lpi, 200 lpi, 300 lpi,
Process colors
Magenta, Yellow, Cyan, Black
Paper Format
Maximum sheet size:
14.33" x 20.5" (364 x 521 mm);
optional 14.33" x 22.5" (364 x 571 mm)
Minimum sheet size: 7" x 7" (178 x 178 mm)
Image Format
Maximum image area is 2 mm less than sheet
size (1 mm border on all sides)
Paper Weight (all trays)
Uncoated: 16 lb bond to 130 lb cover, 60 g/m
to 350 g/m
2
Coated: 60 lb text to 130 lb cover, 90 g/m
to 350 g/m
2
Paper Flexibility
Coated, uncoated, textured, specialty stocks
Recycled, perforated, tabs, transparencies, a
wide variety of labels, synthetics, DocuCard
Never Tear, DuraPaper
®
, UltraMagnet,
DocuMagnet™
Mixed-stock jobs supported at rated speed
No drying time
Transfer overdrive (optional)
Technology Features
SmartPress™ Imaging
ICC Source and Destination and
Fast Path Profi ling
Color check for color monitoring
Single-point transfer printing
Closed-loop controls with Inline
Spectrophotometer
Benchmark gamut of CMYK dry inks
Load dry inks while running
To learn more about achieving the next level
of success, contact your Xerox representative
today, or call 1-800-ASK-XEROX.
©2008 Xerox Corporation. All rights reserved. Xerox
Profi tAccelerator
®
, SmartPress™, SmartSize™, SquareFold™, VIPP
Adobe
®
, Acrobat
®
, and PostScript
®
are registered trademarks of Adobe Systems. AMD™ is a trademark of Advanced Micro Devices, Inc. Creo™, Powered by Creo™, and Spire™ are
trademarks of Eastman Kodak Company. Duplo
GRACoL
®
is a registered trademark of IDEAlliance. Intel
is a registered trademark of PANTONE, Inc. Sun Microsystems
and/or specifi cations are subject to change without notice. 09/08
784P00001
SmartPress™ Paper Handling
Mixed stocks in a single run (up to 12)
Same-edge perfecting registration
Straight paper path
Wide-radius inverter for second-side imaging
Collated sets
Wheeled stacker cart
Load-while-run paper capability and unload
SmartSize™ Technology (iGen4™ exclusive)
Throughput from 40 to 120 ipm based on
image/paper size
Input Capacity
Up to six feeder modules/12 trays
Up to twelve trays
Each tray holds 10"/254 mm (2,500 sheets
80 lb coated text/120 g/m
Any supported stock in any tray
Up to 30,000-sheet capacity or more
Delivery
Up to four stackers
Two carts per stacker
Stacker cart holds 12"/305 mm (3,000 sheets
80 lb coated text/120 g/m
Stacker top tray
2
Collated offset stack delivery
Up to 12,000-sheet capacity
2
Optional
Roll Input
DocuSheeter™ iG provides up to 50,000
additional sheets per roll (based on
8.5" x 11"/A4; 20 lb bond/75 g/m
®
,
Delivered directly into the paper path
Sheets per roll varies based on core size,
cut size, and paper type (coated/uncoated,
caliper weight, etc.)
Inserter
One inserter module, two trays
Enables the addition of specialty
sheets to a job after the fusing process
(i.e., embossed stocks)
®
, the sphere of connectivity design, DocuCard
®
, and XMPie
®
are trademarks of Xerox Corporation in the United States and/or other countries.
®
is a registered trademark of Duplo USA Corporation. GBC
®
is a registered trademark of Intel Corporation. Microsoft
®
is a registered trademark of Sun Microsystems Inc., in the US and other countries. Product appearance, build, status,
2
)
2
)
2
)
®
®
, DocuMagnet™, DocuSheeter™, DuraPaper
®
and Fusion Punch II™ are trademarks of General Binding Corporation.
®
is a registered trademark of Microsoft Corporation. PANTONE
Inline Finishing
Booklet making with Xerox SquareFold™
Booklet Maker or C.P. Bourg Document
Finisher (BDFx) with Square Edge Option
®
(SQE), Duplo
inline Booklet Maker
Perfect binding with Xerox Book Factory
®
Lay fl ats with GBC
Fusion Punch II™
UV Coater
Variable Information Solutions
®
FreeFlow
Variable Information Suite,
XMPie
®
, and other industry partners
Dimensions
Overall standard press dimensions iGen4
(image tower, two feeders, one stacker)
23' 8" x 6' x 8' (L x W x H) 7210 x 1829 x
2438 mm (L x W x H)
7,892 lb (3580 kg)
Xerox FreeFlow
®
Integrated Parallel RIP technology
ICC Device Link Capability
Seamless interoperability with FreeFlow
Product Suite
Adobe
®
®
PostScript
, PDF 1.7, PCL5, TIFF, FRF
®
®
Adobe
Acrobat
8
Confi dentColor Technology
Job and production management GUI
Concurrent receive, RIP, print
AFP/IPDS
®
VIPP
, PPML, Optimized PostScript
Optimized PDF for VDP
Xerox CX Print Server,
Powered by Creo™
®
®
Intel
/Microsoft
-based platform
Creo™ Spire™ workfl ow
Ethernet support
Adobe
®
PostScript
®
, PDF 1.5, PDFX3, TIFF,
TIFF.IT, EPS, RTP, Adobe
Color-management features
Job management GUI
Concurrent receive, RIP, print
VPS, VIPP
®
, PPML, caching support for
variable data printing
®
®
, FreeFlow
, iGen3
, iGen4™,
®
Print Server
®
®
,
®
®
Acrobat
6