- ページ 17

ソフトウェア Xerox Integrated Fiery Color ServerのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Xerox Integrated Fiery Color Server 25 ページ。

SERVICING

3-4

Copier mode DHCP Setup

To connect the Integrated Fiery Color Server to the Xerox Color 550

Production Printer, the Systems settings network protocol must be

set to DHCP for the Fiery to properly print to the copier. The below

steps describe the procedure for setting the copier protocol to

DHCP.

1. Press the Log In / Out button.

2. Enter the System Administrator password.

3. Press the Machine Status button on the copier panel.

4. Select Tools.

5. Select System Settings.

6. Select Connectivity & Network Setup.

7. Select Protocol Settings.

8. Set item 2 TCP/IP – IP Mode to IPv4 Mode.

9. Set item 3 IPv4 – IP Address Resolution to DHCP.

10. Select the Close button.

Integrated Fiery Color Server for Xerox Color 550 Production Printer

a. To change IP Mode, select IP Mode.

b. Press the Change Setting button

c. Select IPv4 Mode.

a. To change IP Address Resolution, select IP Address

Resolution.

b. Press the Change Setting button

c. Select DHCP.

7/09

CONFIGURATION TRAINING GUIDE