- ページ 40

ソフトウェア Xerox Phaser 7300DNのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Xerox Phaser 7300DN 50 ページ。 Quick reference guide
Xerox Phaser 7300DN にも：トラブルシューティングマニュアル (40 ページ), 特徴 (1 ページ), パンフレット＆スペック (4 ページ), 機能マニュアル (40 ページ), サポートマニュアル (28 ページ), ペーパーマニュアル (34 ページ), セットアップマニュアル (18 ページ), セットアップとクイック・リファレンス・マニュアル (45 ページ)

Novell NetWare 3.x/4.x/5.x Network

This section provides installation and troubleshooting steps for Novell NetWare (3.x/4.x/5.x):

Quick setup — see page 35.

Advanced setup — see page 36.

NetWare 3.x/4.x/5.x print server setup — see page 36.

Setup with CentreWare DP — see page 36.

Novell NetWare troubleshooting — see page 37.

For Windows environments, the following software is available:

CentreWare DP - Use this application to configure the printer and the network when using

NetWare 3.x, 4.x and 5.x. Refer to the Advanced Printer Management Tools CD-ROM for the

CentreWare DP software and documentation.

Novell NWAdmin - Use this utility to manage existing queues on networks running NetWare 4.x

or 5.x in NDS or NDPS/NEPS mode.

The Configuration Pages report information that you need for NetWare configuration. On the

Configuration Pages, all zeros in the IPX Networks fields indicates that the printer does not recognize

the network connection; this probably indicates a faulty cable connection, an incorrect frame type, or

Reply to Get Nearest Server has not been set to On. It must be set to On for at least one file server or

router on the same segment as the printer.

Note

For more information about the Xerox NDPS/NEPS solution, refer to the CentreWare for

NDPS User Guide on the Advanced Printer Management Tools CD-ROM or see the

Xerox web site at www.xerox.com/officeprinting/support.

Print the Configuration Pages and retain them for reference. For information on printing

Configuration Pages, refer to the Front Panel section of the Features Guide on the Interactive

Documentation CD-ROM.

Check the Configuration Pages and verify that Novell enable=On and correct Frame Type is set.

Install CentreWare DP from the Advanced Printer Management Tools CD-ROM on a

Windows-based workstation.

Run the CentreWare DP application and choose Setup Wizard from the Printer menu. NetWare

3.x users should select the bindery server install and follow the Setup Wizard steps. NetWare 4.x

and 5.x users should select the NDS install and follow the Setup Wizard steps.

Install print drivers from your printer's Printer Installer and Utilities CD-ROM.

Send a print job to the printer.

Phaser® 7300 Color Printer