Follow these guidelines to move the printer within the office or to prepare the printer for shipment.
Precautions regarding moving the printer
WARNING:
• Always use at least three people to lift the printer.
• Always turn off the printer using the power switch.
• Failure to repackage the printer properly for shipment can result in damage
to the printer not covered by the printer's warranty.
• Damage to the printer caused by improper moving is not covered by the printer's warranty.
Moving the printer within the office
The printer can be safely moved from one location within an office to another as long as it travels gently over smooth
surfaces. Any jarring movement, such as pushing the printer over a raised door threshold or across a parking lot, can
damage the printer.
Preparing the printer for shipment
To transport the printer by vehicle, the printer must be prepared according to a specific procedure. Special hardware
inserts (removed during the installation procedure) must be installed in the printer so that it can be shipped safely.
Additionally, the printer must be repackaged in an appropriate shipping carton.
If you do not have all of the original packaging, order the repackaging kit from
or contact your local Xerox service representative. Instructions for repackaging the printer are provided in the repackaging
kit. If you are unable to repackage the printer, contact your local Xerox service representative regarding our repacking
services.
Page 1 of 1
Follow these guidelines to avoid injuring yourself or damaging the printer.
®
PHASER
7300 COLOR PRINTER
Moving Guide
www.xerox.com/officeprinting/7300supplies