- ページ 11

ソフトウェア Xerox WorkCentre 275のPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Xerox WorkCentre 275 20 ページ。 Xerox multifunction printers specification
Xerox WorkCentre 275 にも：リファレンス・マニュアル (27 ページ), 仕様 (21 ページ), 評価者マニュアル (27 ページ), クイックマニュアル (21 ページ)

ページを印刷する

This screen enables you to

set how far the text from your

tab master pages is shifted

so that it is placed correctly

on the tabs. If you are using

the Xerox tab master

template the default value of

13mm or 0.5 inches is

correct for most tab stock. If you have made your own tab master use the

default setting initially, make a sample set (refer to Sample Set on page 10)

and modify the value as appropriate.

Select Save twice to save your settings and return to the Job Assembly screen.

Load your document into the Document Handler face up with page one on top.

Select the number of sets you require and any image quality adjustments or

output selections you may wish to make that are appropriate to your original

document.

Press Start. Your job will print.

Note:

When printing is complete select the Clear All button to reset the machine to

the default settings.

Note:

Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement

If you are using Build Job because you have divided your original into

segments, the first segment will be scanned and stored in memory. Return

to step 5 and program the second and subsequent segments. When you

have completed all segments select the Build Job Controls button on the

Copy feature screen and select End Build Job. The complete job will print.

In the unlikely event of a paper jam occurring, follow the instructions on the

screen and remove any partially used sets of tab stock from the paper tray.

3 Copying onto tabs