- ページ 21

Halftone - Specifies the halftone settings for printing.

Select [Fine Dots] for the small size halftone dot commonly used in PostScript.

Select [Thick Dots] for coarser dots than the Fine Dots setting.

Select [Type 3] for the same halftone setting that is used in PCL.

Image Enhancement - Specifies whether or not to use the Image Enhancement

function. Selecting [On] smooths out boundaries when printing. This reduces jagged

edges by artificially increasing the resolution of the image. When printing a bitmapped

image composed of coarse halftone dots, smooth color gradation is impossible in

certain situations. In this case, select [Off].

Draft Mode - Specifies whether or not to reduce the amount of toner used when

printing drafts. When [On] is selected, the overall printed color becomes lighter. This is

best for printing documents when high print quality is not necessary.

Custom Paper Auto Orientation - Specifies whether or not to correct the orientation

of the custom paper.

Substitute Tray - Specifies what action to take when the paper for the print size is not

loaded in the machine.

Use Printer Settings - Use the printer settings. The settings can be confirmed on

the control panel.

Display Message - Display paper supply messages on the control panel. Printing

is impossible until paper is supplied.

Use Nearest Size (Adjust to Fit) - Selects the nearest paper size and automatically

adjusts the image size as necessary.

Use Nearest Size (No Zoom) - Selects the nearest paper size and prints the same

size as the image.

Use Larger Size (Adjust to Fit) - Selects paper larger than the original and

automatically adjusts the image size as necessary.

Use Larger Size (No Zoom) - Selects paper larger than the original and prints the

same size as the image.

Xerox WorkCentre 118 Postscript® User Guide

3 Operation with Windows NT 4.0