- ページ 14

ソフトウェア Xerox WorkCentre Pro 255のPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Xerox WorkCentre Pro 255 20 ページ。 Xerox multifunction printers detailed specifications
Xerox WorkCentre Pro 255 にも：クイック・インストール・マニュアル (2 ページ), リファレンス・マニュアル (27 ページ), 仕様 (21 ページ), 評価者マニュアル (27 ページ)

Copying using Build Job

Build Job allows the document to be broken into several segments and copied

segment by segment with different settings applied to each segment. This section

describes how to copy an original document containing printed tab dividers.

Note:

Load the tab stock into the paper trays

Load the tab stock into either the Bypass Tray, Tray 1 or Tray 2 as described in Section

2, Setup on page 3.

Program Build Job

The job must be divided into segments. Each divider will be a segment and each part

of the body of the document between the dividers will be a segment.

Input the number of sets you require.

Select the Job Assembly tab.

Select Sample Set, select On

and Save. This will enable you

to print one sample set to

ensure that you have

programmed the job correctly.

From the Job Assembly screen

select Build Job.

Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement

The original printed tab dividers MUST be copied from the document glass

while the body of the original can be copied using the document handler.