- ページ 5

プリントサーバー Xerox DOCUCOLOR 12のPDF マニュアルの使用をオンラインで閲覧またはダウンロードできます。Xerox DOCUCOLOR 12 12 ページ。 Carrier
Xerox DOCUCOLOR 12 にも：仕様 (2 ページ), リファレンス・マニュアル (10 ページ), クイック・スタート・マニュアル (5 ページ), クイック・スタート・マニュアル (8 ページ), 補足マニュアル (4 ページ), 補足マニュアル (18 ページ), マニュアルを知る (24 ページ)

Using the Fiery X12/Fiery X40 Advanced Controller Interface Kit

Introduction

This document describes how to install the Advanced Controller Interface kit upgrade in

order to connect a monitor, keyboard, and mouse to a Fiery X12 or Fiery X40. In

addition to connecting the monitor, keyboard, and mouse to the back of the Fiery X12/

Fiery X40 you will also need to replace the BIOS chip installed on the motherboard.

Along with this document, this kit includes:

• Advanced Controller Interface BIOS chip

(includes an additional socket mount in case pins are bent during installation)

• Monitor, keyboard, and mouse (provided separately)

use t

In order to

his kit, you need to:

• Access the Service menu and select Install Option

• Shut down the Fiery X12/Fiery X40 and remove the side panel

• Replace the BIOS chip on the motherboard

• Reassemble the Fiery X12/Fiery X40

• Connect the monitor, keyboard, and mouse to the back of the Fiery X12/Fiery X40

• Power on the system

If you are installing more than one kit that required a BIOS upgrade, you will need

OTE

to go through the BIOS upgrade procedure for each BIOS chip included. The order in

which you install and upgrade the BIOS chips does not matter.